Error Code Explained
What Does the Viking Drain Fault Error Code Mean?
A Viking dishwasher drain fault occurs when standing water remains in the tub after a cycle completes. The most common cause — and the one homeowners can address themselves — is a clogged filter assembly. If the filter is clean and water remains, the drain pump motor has likely failed.
Root Causes
Common Causes of the Viking Drain Fault Error Code
-
1Clogged Filter AssemblyFood particles clog the filter at the bottom of the tub, blocking drain pump suction. Monthly filter cleaning prevents most drain faults.
-
2Failed Drain Pump MotorThe drain pump motor has failed mechanically or electrically.
-
3Blocked Drain HoseThe drain hose has kinked, collapsed, or is blocked with debris.
Step-by-Step Guide
How to Troubleshoot the Drain Fault Error Code
Safety First: Always disconnect the Dishwasher from power before inspecting any internal components. Do not attempt electrical repairs. If in doubt, call a certified technician.
-
1Clean the FilterRemove the lower rack, pull out the cylindrical filter (twist counter-clockwise), rinse under running water, and reinstall.
-
2Check Drain HosePull the dishwasher out and inspect the drain hose for kinks or blockages.
Professional Service
When to Call a Viking Technician
If the filter is clean and the hose is unobstructed but water remains, the drain pump requires professional replacement.
FAQ
Frequently Asked Questions — Viking Drain Fault
-
Monthly under normal use. More frequently if the dishwasher runs daily or dishes are heavily soiled.
Book a Viking Dishwasher Repair Appointment
Viking specialists available same-day. We'll call within 60 minutes to confirm your appointment.
- Free Diagnosis Estimate
- 30-Day Warranty
- No Hidden Fees
- Same-Day Service Available
Your information is secure. We never share or sell your data.